TL866II Plus a nastavenie fuse bitov ATTINY13

[PatrikMckane]

Zdravim mam nastavit fuse bity na attiny13a takto
High: 0x02 (BOD Level 2.7V)
Low: 0x58 (SPI Enabled/WDT ON/Ext Clock) or 0x78 (No WDT)

Low bit viem nastavit presne ale high bit iba ako 0xe2
je to ok ? prikladam screen shot

[dan21]

http://www.engbedded.com/fusecalc/

[PatrikMckane]

Ano aj to som pozeral ale v ovladacom programe my stale zobrazo 0xE2

[PatrikMckane]

ok Tak nic. funguje to aj tak.
poprosim lock