skusam zakomponovat Blitzwolf BW-SS5 do esphome. FW uspesne nahraty, ovladanie cez HA ide bez problemov.
Problem nastava pri HW spinacoch. Ked zapne spinac rele rychlo cvaka a ziarovka blika. Posielam obrazok zapojenia a moj kod.
Viete mi prosim pomoct?
Dakujem
switch:
- platform: gpio
name: "Rele 1"
pin: GPIO14
id: Rele_1
- platform: gpio
name: "Rele 2"
pin: GPIO15
id: Rele_2
binary_sensor:
- platform: gpio
pin:
number: GPIO12
mode: INPUT_PULLUP
inverted: true
name: "Mini relé"
on_press:
- switch.toggle: Rele_1
on_release:
- switch.toggle: Rele_1
- platform: gpio
pin:
number: GPIO13
mode: INPUT_PULLUP
inverted: true
name: "Mini relé"
on_press:
- switch.toggle: Rele_2
on_release:
- switch.toggle: Rele_2
