Ahojte, nema niekto skusenosti s tymto automatom?
Konkretne potrebujem poradit postup ako sa na neho napojit a stiahnut / nahrat zalohu...
Viem ze potrebujem dosovsky sw a riadny rs232 port. Sw mam (neovereny) a kabel zrejme obsahuje nejaky prevodnik...
Nerad by som odpiekol pocitac alebo plc...
Diky
EBERLE PLS 511S
Moderátori: Drakoush, Moderátori
- kukinko
- Ultimate člen
- Príspevky: 1536
- Dátum registrácie: 11 Júl 2008, 00:00
- Vek: 41
- Kontaktovať používateľa:
EBERLE PLS 511S
0
"programujem = hram sa" s Arduino / ESP, LOGO!, Simatic + TIA
+ nejaka ta elektrobizuteria okolo
+ nejaka ta elektrobizuteria okolo
Re: EBERLE PLS 511S
Pise sa o tom toto :
If it IS the 511s you have, get software called EDOPS2 to allow upload, edit etc from any PC via RS232 cable. Cable has a cross over on it and marked DL .6.
https://www.ebay.com/itm/Eberle-Datenle ... 100623.m-1
If it IS the 511s you have, get software called EDOPS2 to allow upload, edit etc from any PC via RS232 cable. Cable has a cross over on it and marked DL .6.
https://www.ebay.com/itm/Eberle-Datenle ... 100623.m-1
0